Description

The Junior Ultramount Press Riser has the same beefy 3/16″ thick steel construction as the standard Ultramount, however, the Junior is only 7-1/2″ tall instead of 9-3/4″.

This is a dedicated mount, meaning you select it for the press you have and your press bolt directly to it. If you want quick change style, they are right (Here)

Footprint of the mount is 10-1/2″ wide by 9″ deep.

(Note) With the Junior Ultramount only being 7-1/2″ tall, most press linkages will hang below the benchtop to impede opening the cabinet doors or drawers (if you have them) below your bench. If you have any doubt before placing an order, measure the linkages hanging down below your bench top and subtract 7-1/2″.

If you want to have the press completely on top of the bench, the standard 9-3/4″ tall Ultramount will fix you up perfectly.

Attention: Please choose your particular press application from the drop down box above.

Note:If you do not see your press listed here, it is most likely available in quick change style right (Here)Swap out your presses in 30 seconds.

Downloadable 7-1/2″ Junior Ultramount footprint PDF
(Here)

Hardware to bench info: (You will need 4pcs of 5/16″ diameter hardware of whatever style you need to attach the mount to your bench. I would include it, but everyone’s benches are different and require different hardware.) However, for simplicity, here are 2 premade bolt kit options for most benches up to 1 1/2″ thick.

Have a look (Here) for the standard bolt through style kit:

And (Here) for the Barbed T-Nut style kit:

Additional information

mycustom

FOR PRESS MODEL#Choose press model here, # 7 Dillon Square Deal B, # 12 Dillon XL 650 & XL 750 (XL650. XL750), # 12-1 Dillon SL 900 Shotshell (SL900), # 14 Dillon RL 550 B & C and Dillon RL 450(includes bullet tray support tab on left) (RL550. RL450), # 88 Dillon RL & Super 1050. RL 1100 and CP 2000 (RL1050. Super1050. RL1100. CP2000), # 15 Hornady LNL "Classic". Classic PRO & Hornady/Pacific 007 Single stage, # 19 Hornady .50 BMG, # 24 Hornady LNL AP. Hornady Pro 7 and Hornady Projector, # 68Hornady LNL IRON Single Stage, # 2 Redding Ultramag, # 3 Redding T-7 Turret (T 7 T7), # 9 Redding Big Boss and Big Boss II, # 4 Lee Loadmaster (Includes output bin bracket), # 5 vintage Lee Pro 1000 with RED base (Includes output bin bracket)(NOT for the new 2018 Lee Pro 1000 with SILVER base. see # 79), # 6 Lee Classic Turret (Lee #90064) (NOT for the Value Turret presses), # 10 Lee Breech Lock Challenger, # 17 Lee Classic Cast Single Stage (aka Lee 50 BMG Single Stage), # 22 Lee Breech Lock Classic Cast, # 25 Lee Reloader (Lee #90045). Lee APP (Lee #90933 & #90951) and Lee ACP (Automatic Case Primer Lee #91610), # 31 original Lee Value Turret w/ RED base (Lee ##90932 4 hole or Lee #90496 3 hole) (NOT for the Classic Turret. see #6) (NOT for the 2018 Value Turret w/ SILVER base. see #79), # 79/P1 Lee Auto Breech Lock Pro 4000.Lee 2018 Value Turret (Lee #90932) and Lee 2018 Pro 1000 with SILVER base (NOT the original Lee Value Turret w/ RED base. see # 31), # 95 Lee Six Pack Pro 6000 and Lee Ultimate Turret, # 11 RCBS Rockchucker RC. RCII. RCIV Supreme. RCBS Pro2000 and RCBS Turret, # 16 RCBS JR. JR2 and JR3, # 18 RCBS RS2. RS3 and RS5 (Reloader Special)(original RCBS "RS" is top plate #18-1), # 18-1 RCBS RS (original Reloader Special), # 23 RCBS AmmoMaster 1 & 2, # 26 RCBS Summit and RCBS Mini Grand Shotshell, # 26-1 RCBS Rebel, # 27 RCBS Big Max, # 36 RCBS Grand Shotshell, # 63 RCBS Pro Chucker 5 and 7, # 1 Lyman T-mag IIand Crusher II, # 49 Lyman Spartan Turret, # 50 Lyman Orange Crusher, # LBS/76 Lyman Brass Smith Victory Single Stage, # LBS/77 Lyman Brass Smith Ideal Single Stage, # LBS/78 Lyman Brass Smith All American 8 Turret, # 32 MEC Shotshell presses MEC 600. 600JR. 600JR "82". 650. Super 600 & Versa MEC (NOT the 650 N12) (NOT the 600 JR MARK V see. #54), # 8 Forster Co-Ax & CoAx XL, # 89 Area 419 ZERO Turret, # 103 Short Action Customs Nexus, # 96 Frankford Arsenal X-10 (X10), # 101 Mark 7 Apex 10, # 99 L.E. Wilson Single Stage, # Star Universal, # 00 Universal Large Blank top plate 6" x 7" ( Drill your own ) (Note Increases footprint width of Micro and Junior mounts by 1.5")

Reviews

There are no reviews yet.

Be the first to review “Junior™ Ultramount 7-1/2″ Press Riser”

Junior™ Ultramount 7-1/2″ Press Riser