Flush Mount Quick Change Baseplate

Description

One mount, countless uses.    The flush mount quick change baseplate is for the reloader who’s bench serves many purposes. Enjoy a clear, flat work space when you want it, but in only 30 seconds, you can mount a vise, case trimming tools or your favorite press and get to work.  Two sheets of heavy duty 3/16 & 1/4 thick steel welded together and can take anything you can throw at it and look good doing it with its durable black powdercoat. 

Swapping out presses/tools takes less than 30 seconds and requires no tools.

Attention:  This plate is made to be routed into your bench to create a nice, flat unobstructed workspace. It also allows folks to use the quick change system, with-out adding any height to their equipment, user ergonomics or to avoid overhead cabinets, etc. The plate measures 8″ left/right x 7 7/8″ front to back. When installed it overhangs the bench face 1 1/2″ to give access to the wingnuts for fast, easy top plate swaps.   

Note:  If you do not want to route it in flat and don’t mind your QC base sticking up 1/2″ proud off the top of your bench, it can be surface mounted to your benchtop using this spacer. (No route riser plate)

Note: (The leg in the photo does not come with the kit, it is the leg to the bench.)

Note2: Required routed out depth is precisely 716″ deep.

!!Required!! Quick change top plates (Each reloading press or piece of equipment you want to use with the quick change set up, needs its own top plate.) 

The quick change top plates that lock into the QC mounts are in 3 different category’s:

• Listing for Quick change top plates for Reloading presses & equipment by brand (Here)

• Listing for vises, barrel vises, trimmers, etc (Here)

• Listing for frequently requested QC plates (Here)

Make sure you look thru all 3 quick change top plate listings in the quick change section, if you don’t find the one you need, send me a quick email, we most likely have it in our files  ServiceTeam