Ultramount™ Press Riser for Dillon Square Deal B press

Description

The tall Ultramount raises your Dillon Square Deal B press up 9-3/4″ to get the shell holder closer to your eyes while increasing stability, leverage and ergonomics.

This is a dedicated style Ultramount which means dedicating  your press to this press riser only.

If you want fast equipment changes please see the Quick Change style Ultramount listings. (Here)

The features of the dedicated tall Ultramount include:

• high-quality super solid 3/16 steel construction

• accessible lower storage tray

• beautiful black powder coated finish

• dedicated top plate & hardware kit to mount your Dillon Square Deal B press

The tall Ultramount is 12″ wide, 11-1/2″ deep, 9-3/4″ tall.  If that’s too high for your bench we also have the 7-1/2″ Junior and 4″ Micro Ultramounts available in the Ultramount section.
(Here)

The tall Ultramounts modular design lends itself to fit just about any reloading press available today.  This means if down the road you decide to change presses, or dedicate a different press to your existing press riser set up, all you have to do is order a new dedicated top plate.  The new dedicated top plate will come powder coated to match your existing Ultramount legs and include the required hardware to attach your new press.

Note: If your older Square deal has the spent primer cup that hangs way below the press like this photo, you need the update kit from Dillon which pulls the cup up and allows the primer collectioncup  to clear the benchtop.   This does not apply to the 4″ Micro and the 7.5″ tall Junior mounts as they cantilever over the bench edge.

Shown with: (Not included) more equipment to optimize your Square deal.

1. optional roller handle conversion. (Here)

2. Bullet and empty case & bracket system.(Here)

3 LED lighting system. (Here)

Hardware to bench info:   (You will need 4pcs of 5/16″ diameter hardware of whatever style you need to attach the mount to your bench.  I would include it, but everyone’s benches are different and require different hardware.)   However, for simplicity, here are 2 premade bolt kit options for most benches up to 1 1/2″ thick. 

Have a look (Here) for the standard bolt through style kit:

And (Here) for the Barbed T-Nut style kit: